Does not require controller box. Will require on / off toggle switch (not included). Optional momentary switch may be used if it will be necessary to change flash patterns after install.

Available Colors: Amber, Blue, Green, White, White/Amber, and Blue/Amber

Specifications:

Casing Dimensions: 114mm x 34mm x 21mm (length x height x depth)
Case Material: Poly Carb with Aluminum Base
Length of Wire: 20cm
Lens Material: Polycarbonate
IP Rating: 65
Voltage: 12V-24V
Power: 12W
Average Current Draw: 500mA
Max Current Draw: 700mA
Flash Patterns: 16

5 Wire System:

1. Red: Positive
2. Black: Ground
3. White: Negative Signal for 1 sec to change flash pattern.  Hold for 5 sec to change to steady burn (LEDs on without flashing)
4. Blue: Wig Wag (when 2 separate light heads have this wire joined, they will alternate when the light is on and off)
5. Yellow: Synchronize